"求救" aspire one a150 開機無螢幕又無法更新且超燙.....

如標題,

小弟的aspire one a150 日前開機無螢幕,

先是送修結果報價4900,原因:主機板掛了

後來上網搜尋了一下似乎開機無螢幕是常態

於是就付了三百檢修費拿回來死馬當活馬醫。

以下步驟請各位大大幫忙看哪邊有問題:

1.1G的隨身碟格式化FAT將下載好了3309放入隨身碟...,

2.插入aspire one開機按住fn+esc 然後按電源鈕,

3.放開fn.esc,再按一次電源,

但是並沒有繼續更新~~

然後就越來越燙......

真的是主機板掛了嗎

PS:另一個方法是按F2進入BIOS由隨身碟開機,

但是按F2並沒有進入BIOS畫面。

求板上各位神人救救小弟的aspire one...

1.小NB主機板是$3900哦,不是$4900吧!(官網有公告維修價目表哦)
不是...工程人員報價錯誤,不然就是....要A你$$
不知道大大是去哪家修理的??

2.目前ACER官網AOA150更新BIOS為3310的版本
3310官網更新日期是2009/08/05,應該可以直接上3310,不用再先更新3309吧!!

為什麼大大更新BIOS是按FN+ESC然後按電源鈕??

記得ACER更新BIOS有DOS和windows兩種版本!!任選一種就可以執行更新才對吧!!
ntamuro wrote:
小弟的aspire one a150 日前開機無螢幕,

...(恕刪)


我家裡小朋友的aspire one a150 今天開機也是無螢幕,外接 LCD 也不行


而且上個月保固就到期

難道小筆電真的壽命只有一年 ?

不知發文的大大找到解決的辦法了嗎?

花3900 換版

不如再買一台新的 還有保固一年

eszc wrote:

1.小NB主機板是$3900哦,不是$4900吧!(官網有公告維修價目表哦)
不是...工程人員報價錯誤,不然就是....要A你$$
不知道大大是去哪家修理的??

2.目前ACER官網AOA150更新BIOS為3310的版本
3310官網更新日期是2009/08/05,應該可以直接上3310,不用再先更新3309吧!!

為什麼大大更新BIOS是按FN+ESC然後按電源鈕??

記得ACER更新BIOS有DOS和windows兩種版本!!任選一種就可以執行更新才對吧!!


會按Fn+Esc是參考以下這兩篇

http://www.mobile01.com/topicdetail.php?f=232&t=995188

http://www.mobile01.com/topicdetail.php?f=232&t=1084480

但都無法解決無法更新的問題

話說我是拿去宏碁官網上的苗栗維修中心,

他們那邊報的價4900無誤,

算了真不能更新就網拍掉.....

以後不碰這家的東西了,

連官方的維修中心都要多賺一手..
其他網站找到的, 你可試試. 好像BIOS檔案名稱要改成-->ZG5IA32.FD



文章出處-->http://macles.blogspot.com/2008/08/acer-aspire-one-bios-recovery.html
Acer Aspire One BIOS Recovery
The Acer Aspire One has a built-in BIOS recovery routine, which can boot into a minimal BIOS environment via a special boot block to re-flash the BIOS even if the system does not pass POST and does otherwise not boot anymore. This is also known as crisis disk mode.

First format an USB flash drive with FAT. It does not need to be bootable.

Download the latest BIOS, and extract all files from the zip file. Put both FLASHIT.EXE and the BIOS file with FD suffix in the root directory of the flash drive. The files must not be in a folder. Rename the BIOS file to ZG5IA32.FD before proceeding. It does not work with any other filename.

Turn the AA1 off, with the flash drive still connected, and make sure both battery and AC adapter are also connected.

Press Fn+Esc, keep it pressed and press the power button. Release Fn+Esc after a few seconds. The power button starts blinking at this point. Press the power button once. The AA1 will now initiate flashing the BIOS. Do not interrupt it under any circumstances. After a while the button stops blinking, and the AA1 reboots shortly after. Wait patiently.

If it doesn't reboot by itself, but keeps blinking, wait a few minutes before turning it off, and try again.
文章分享
評分
評分
複製連結

今日熱門文章 網友點擊推薦!