UM790 pro/UM780 pro 官方BIOS 1.09
BIOS 1.09下載
*****************************************
* BIOS Release Notice *
*****************************************
Release Date:
2023/11/20
BIOS Version:
1.09
BIOS Checksum:
84f7
BIOS Description:
1.Update PI 1.1.0.1a
2.Add UMA size of 16G selection
3.Fixup 5200 memory Can't use issue
4.Fixup IPU item control fail after PI 1.1.0.1a
PS 欲買Meta quest3歡迎使用我的推薦連結 可得30美元quest商店購物金 https://www.meta.com/referrals/link/opengl13
Dear customer, hello.
Regarding issues such as blue screen on UM790Pro
There are two general situations now, and we will provide you with a detailed description to see if it can help you.
First scenario:
The CPU used by UM790Pro is causing.
Usually, a situation occurs where the computer switches from high load to low load, causing a significant increase or decrease in current for a short period of time, resulting in excessive current discharge. The slow release capacitor of the CPU peripheral protection circuit cannot directly take effect, resulting in CPU penalty for power outage protection or load boost.
There will be situations such as blue screen restart, power outage, shutdown, and crash;
The criterion for determining this type of situation is that after a high load changes to a low load for a short period of time, there are situations such as restarting, blue screen crashes, and shutdown, and a "core error 41" occurs;
The troubleshooting method for this situation is
Use MemTest86 to test your DDR If it is normal, please provide us with the test results;
After confirming that the DDR is normal, please use a single DDR to perform a verification experience on the upper and lower slots of the memory slot to determine and determine the likelihood of slot damage;
After completing the above steps, please try to find the corresponding model of system on the support page of the Minimum official website and download it. Use this system to reinstall the system and troubleshoot all software and system issues at once
The usual solution is to add a capacitive current bridge on the periphery and a CPU slow-release link.
笑, 我自己是跑完memtest86 成績0失誤後,
重啟立即遇見壓力測試不穩, 休閒瀏覽也不穩, 最後將RAM降速為5200 MT/s 解決.
仔細翻讀幾回, 解釋與前頭提過的差不多.
且多了一個情境, 就算電容電壓不在谷值臨界範圍,
突發遇見高負載時 也會因其電流(響應)釋放過慢幫補不及導致跳機.
關閉廣告