一直是使用官方版的韌體，想說應該穩定度會很好，結果這版的andriod 4.0.3真令小弟蠻失望的！
一氣之下就再次試了基於cm9，在xda超火的韌體“HyDrOG3N-ICS”用了幾天發現真的又穩定、順暢，還有重點是真的省電，現在分享給喜愛i9100的大大們！
這個韌體有兩個版本推薦一個就是xda原作者的版本，這個版本直接刷就會有繁中的選項了，記得需要google服務的大大，別忘了下載一併刷入咯！（呵呵~我想應該沒有人用andriod系統會不需要的吧）但是這個版本就沒中文輸入了咯，可能就需要另外刷入了，下面會提供cm9能用的三星輸入。
另一個版本就是如果在內地的大大或者像小弟外語能力比較差，需要看中文才會懂得大大咯，因為這個韌體有很多很多小細節的設定，擴張性真的很大很大，對岸版本把這些小細節的設定基本都已經簡體中文化了（要看中文記得將語言轉到簡體哦），小弟真的不知怎麼讓它能繁中化，只能分享以後有高手會喜歡，願意花時間將它好好地台灣化啦~呵呵!另外其他的就等大大們下來用用就知啦！呵呵~下面會有圖片的小介紹啦！
ps：對岸版的已經將google套件都已經整合進去了，不用另外刷入！
xda原始作者的網站
對岸有將設定細節簡體化原網站
請用Recovery模式刷入即可
三星cm9能用的輸入
ZSLPF以及ZSLPS的基頻
兩個基頻
還有就是其實cm9這次的版本真的不錯，其實小第目前就發現有三家還不賴得內核可以刷入，下載也請到原作者網站下載啦！就當是支持下人家的辛苦啊！
SiyahKernel
xda原址
作者的網站
v3.0.1 b1 - April 11, 2012
Changelog:
■touchscreen sensitivity tweaks
■sio fifo_batch=1
■set default usb mode to mass_storage for MIUI ROMs.
■disabled smooth scaling for interactive based governors (lulzactive and interactive)
■prevented tick sound after reboots or in download/recovery modes
■Dual-booting For now, you will only have one additional option available in CWM Touch Recovery and that is cloning your primary ROM as secondary. If you want to have another ROM as secondary ROM, follow these steps: 1.Make a nandroid backup of your existing ROM 2.wipe everything and install the other ROM 3.Boot the ROM and make customizations. Don’t forget to reflash SiyahKernel if the ROM flashes another kernel. 4.Use CWM Touch Recovery to clone your rom as secondary rom. 5.Restore nandroid backup Keep in mind that you will not be able to flash additional CWM packages to the secondary ROM. Therefore, it is important that you have flashed all additional packages and customizations in the third step before you make the clone in the 4th step. Some notes about dualbooting:
■If you do not make any cloning you won’t be prompted to boot the second ROM. ■you may need to reflash this kernel after a nandroid restore if your nandroid backup is created with another kernel.
■there is no progress bar during the cloning process. it will be implemented later but for now, be patient because the size of data is huge and may take up to 10 minutes to clone.
■there are some checks missing. for example if you do not have enough space in your internal sdcard (you need 2.1GB free space) you will not get a warning or error, but dual booting won’t work. remember, this is beta and not all features are implemented yet. In time, other dual-booting options in CWM Touch Recovery will be implemented.
■you won’t be able to use mass storage mode for /sdcard in second rom because we have our data and cache partitions on /sdcard. only external sdcard will be mounted if you are using mass_storage mode. mtp should work fine for sdcard. ■once again, you won’t be able to flash any CWM flashable zip to second ROM.
N.E.A.K. Kernel
xda原址
作者的網站
最新v2.0.2x-4,6,2012
Changelog:
- Support for MIUI ROMs (only AOSP version of NEAK)
- Enabled CRC32 slice-by-8 algorithm
- exynos4: Disable SW downclock in cpuidle
- galaxys2: made google gadget code using 2 luns for aosp roms
- cpufreq: smooth scaling interface
- recovery: fixing switched mounts for both sdcards into mounts&storage menu
- ondemand: tweaking for responsiveness
- vr: a bit tweaking for a bit more throughput
- enabled mass storage mode for aosp roms (who supports it)
- sched: re-enabling GENTLE_FAIR_SLEEPERS
- TCP buffer tweaks
- Fixed lags into UI (removed CFS tweaks)
- Fixed DPI issues into AOSP ROMs
thoravukk Kernel
xda原址
最新2.17- 4,10,2012
Changelog: ***2.17***
Patch to linux 3.0.27
disable pegasusq governor
set leds on for 1 secs as standard
change recovery color
set the right path for sd and sd-ext in recovery
disable more kernel debbuging
sio tuned for flash device's
set lulzactive as default
這裡有個特殊的天氣設定，需要在進階里開啟
這就是進階設定簡體化的介面
這是cm9裡就有的設定，都中文化了！
這是撥號裏面的進階設定
以下兩張是開啟Navigation bar的效果
